Unpacking The Factory-Integrated-In-Rack Option: Process Overview; Unpacking The Hpe Rack Factory-Integrated With The Storage System - HPE 3PAR StoreServ 9000 Customer Self Install Manual

Unpacking the factory-integrated-in-rack
option: Process overview
Prerequisites
Review the information about the placement of the HPE 3PAR StoreServ 9000 Storage system and
reserving room for service access in the HPE 3PAR StoreServ 9000 Storage Site Planning Manual
available at the Hewlett Packard Enterprise Information Library website:
www.hpe.com/info/storage/docs
Procedure
1. Complete Unpacking the HPE rack factory-integrated with the storage system on page 12.
2. Complete Positioning and stabilizing the HPE rack on page 20.
3. Drives are installed at the factory. However, if additional drives were received and not installed,
complete: Installing the drives: Process overview on page 21.
4. Review Cabling the factory-integrated-in-rack option: Process overview on page 24 and
complete the process.
Unpacking the HPE rack factory-integrated with the
storage system
During this procedure, refer to the unpacking diagrams on the outside of the cardboard shipping
container.
For more information about placement of the HPE 3PAR StoreServ Storage system and reserving room
for service access, see the HPE 3PAR StoreServ 9000 Storage Site Planning Manual available at the
Hewlett Packard Enterprise Information Library website:
www.hpe.com/info/storage/docs
NOTE: The illustrations in this procedure are examples and might not be an exact representation of your
HPE rack (cabinet).
12

Unpacking the factory-integrated-in-rack option: Process overview