HPE 3PAR StoreServ 9000 Customer Self Install Manual page 2

©
Copyright 2018-2019 Hewlett Packard Enterprise Development LP
Notices
The information contained herein is subject to change without notice. The only warranties for Hewlett
Packard Enterprise products and services are set forth in the express warranty statements accompanying
such products and services. Nothing herein should be construed as constituting an additional warranty.
Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained
herein.
Confidential computer software. Valid license from Hewlett Packard Enterprise required for possession,
use, or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer
Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government
under vendor's standard commercial license.
Links to third-party websites take you outside the Hewlett Packard Enterprise website. Hewlett Packard
Enterprise has no control over and is not responsible for information outside the Hewlett Packard
Enterprise website.
Acknowledgments
®
Microsoft and Windows
United States and/or other countries.
Revision history
Part Number
QL226-99978a
QL226-99978
QL226-99888
Q0E92-90703
®
are either registered trademarks or trademarks of Microsoft Corporation in the
Publication Edition
date
January 2019 4
December 2018 3
June 2018 2
February 2018 1
Summary of changes
• Updated "Guidelines for redundant power
cabling"
• Added "Checking enclosure power redundancy
(optional)"
• Updated "Controller node LEDs and ports"
• Updated "Guidelines for cabling"
• Support for a new physical service processor,
HPE ProLiant DL360 Gen10 Server
• HPE StoreFront Remote (SFRM) content
replaced with HPE InfoSight content
With HPE 3PAR OS 3.3.1 (MU1) Patch 09, Patch
11, and Patch 18 software, also known as HPE
3PAR OS 3.3.1 EMU1, and HPE 3PAR Service
Processor 5.0.2.1 software or later software
versions, CSI supported for the HPE 3PAR
StoreServ 9000 Storage