Setting Up The Storage System Using The Hpe 3Par Guided Setup - HPE 3PAR StoreServ 9000 Customer Self Install Manual

7. Follow the setup progress. The full list of initialization steps is displayed on the right side the screen
with its status. The steps that have not yet been completed are listed on the left side of the screen.
8. Once the setup is complete, reboot the SP by clicking the Reboot link at the top of the screen. The SP
Service Console automatically reconnects to the login screen. Allow several minutes for the reboot.
Setting up the storage system using the HPE 3PAR Guided
Setup
Procedure
1. Once the service processor (SP) has restarted after setting up the service processor using the HPE
3PAR Guided Setup, the Service Console login page is displayed with a single button and the Guided
Setup window open.
2. Click Continue, enter the admin credentials you previously assigned in the Guided Setup, and then
click Login.
A window opens that has more information and instructions.
3. If no storage system is added to the Service Console, you will be taken to the Systems page and the
Setup StoreServ dialog opens.
4. Click Next.
A window opens that has more information and instructions.
5. To close the Guided Setup window, click Continue.
You will then be able to fill in the required information for adding a storage system. This process
includes accepting and caching a security certificate; entering system settings, date, and time settings;
storage system credentials; entering information about the installation site, and adding a system
support contact.
6. Follow the instructions on the dialog that opens. You will have the option of adding a new uninitialized
storage system or one that has already been initialized.
7. Once you have completed filling in the required settings, click Setup.
A window opens that has information about the setup process and how the process can be monitored.
You will be able to follow the setup progress on the StoreServ Setup screen, which is similar to the
Service Processor Setup screen. Once the setup is complete, a window opens that explains the next
steps to take in the process.
TIP: If the Guided Setup remains incomplete due to an error, the checklist displays the error with
a link to the section of the setup dialog related to the error condition.
48 Setting up the service processor and storage system software: Process overview