Factory Default Settings - Lightware MX2-8x8-HDMI20-L User Manual


  
12. Appendix
HDMI Input/Output Ports
Port connector type ............................19-pole HDMI type A receptacle
Standard .................................................... DVI 1.0, HDMI 1.4, HDMI 2.0
Max. video resolution .............................................................................
................... 4096x2160@60Hz RGB 4:4:4 (up to 600MHz pixel clock)
.................................................................... 1920x1080@120 Hz, 36 bit
Audio formats .................... all formats in line with HDMI 2.0 standard
Reclocking .................................................... Pixel Accurate Reclocking
HDCP compliant...............................................................Yes, HDCP 2.2
DP Input Ports
Port connector type ............................. 20-pole DisplayPort receptacle
Standard ..............................DVI 1.0, HDMI 1.4, HDMI 2.0, DP 1.2 (with
............................................................... 18 Gbps bandwidth limitation)
Max. video resolution .............................................................................
................... 4096x2160@60Hz RGB 4:4:4 (up to 600MHz pixel clock)
.................................................................... 1920x1080@120 Hz, 36 bit
Audio formats .................... all formats in line with HDMI 2.0 standard
Reclocking .................................................... Pixel Accurate Reclocking
HDCP compliant...............................................................Yes, HDCP 2.2
Audio Input/Output Ports
Signal transmission ..............................Balanced or Unbalanced audio
Gain (input) ........................................................... from -12dB to +35 dB
EDID management
EDID emulation ..................................................................................Yes
EDID memory ................ 144 factory presets, 100 user-programmable
MX2-HDMI20 series – User's Manual
12.2. Factory Default Settings
Parameter
Network Settings
IP address Dynamic (DHCP is enabled)
RS-232 Port
Port setting 57600 BAUD, 8, N, 1
Control protocol LW3 protocol
General Video Settings
Crosspoint setting Input 1 on all outputs
F49 - (Universal HDMI, all
Emulated EDID audio formats with deep color
support) on all inputs
HDMI port
HDCP enable (input) Allow HDCP 2.2 and HDCP 1.4
Audio source (input) HDMI
HDCP (output) Depends on input
Signal type (output) Auto
Conversion mode (output) Passthrough
Audio mode: HDMI port (output) HDMI
Audio mode: HDMI with analog HDMI+ANALOG
audio (output)
Scrambling Auto
TMDS clock rate Auto
Signal type Auto
DisplayPort
HDCP enable (input) Allow HDCP 2.2 and HDCP 1.4
Link data rate (input) Max. HBR2 (5.4 Gbps)
Link lane count (input) Max. 4 lane
Audio source (input) DisplayPort
Audio Input/Output Ports
Audio source HDMI
Audio mode (HDMI out) HDMI
Audio mode (Analog audio out) HDMI+ANALOG
Enabled (de-embedding from
Analog audio output
HDMI signal)
Balance: 0 (center)
Analog Audio Input Levels
Gain: 0 dB
Balance: 0 (center)
Analog Audio Output Levels
Volume: 0 dB
Setting / Value
83