Lightware MX2-8x8-HDMI20-L User Manual page 72


  
7. LW3 Programmers' Reference
RS-232 Port Settings
Setting the Current Command Protocol
SET·/MANAGEMENT/SERIAL.Protocol=<prot_mode>
Ý
Setting the Baud Rate
SET·/MANAGEMENT/SERIAL.Baudrate=<BAUD_value>
Ý
Network Settings
Querying the Current IP Address
Ý GET·/MANAGEMENT/NETWORK.IpAddress
Setting a Dynamic IP Address
SET·/MANAGEMENT/NETWORK.DhcpEnabled=<DHCP_state>
Ý
Setting a Static IP address
SET·/MANAGEMENT/NETWORK.StaticIpAddress=<IP_address>
Ý
Subnet Mask Setting
SET·/MANAGEMENT/NETWORK.StaticNetworkMask=<Net_mask>
Ý
Gateway Setting
SET·/MANAGEMENT/NETWORK.StaticGatewayAddress=<Gateway_address>
Ý
EDID Management
Querying the Emulated EDIDs
Ý GET·/EDID.EdidStatus
Setting the Emulated EDID
Ý CALL·/EDID:switch(<Source>:<Destination>)
Copying an EDID into the User EDID Memory
Ý CALL·/EDID:copy(<source>:<destination>)
MX2-HDMI20 series – User's Manual 72