Lightware MX2-8x8-HDMI20-L User Manual page 98


  
12. Appendix
v1.2.3b5
Release date: 2018-06-11
New feature:
▪ Added MX2-8x8-HDMI20-AUDIO-L frame support.
Bugfix:
▪ Fixed an issue that produced multiple hotplug pulses on the
inputs. Although this does not violate the standard, it may
cause compatibility issues with certain devices (like Barco
Eventmaster).
▪ Fixed a bug that once in a while caused the connected input or
output ports to show invalid pixel clock rates. If the output port
is affected, the video does not appear on the connected display.
v1.2.2b10
Release date: 2018-03-28
Bugfix:
▪ Fixed a bug that might cause a video port to hang when the
CEC I2C communication is slow (e.g. when using DP to HDMI
adaptors).
▪ Fixed a bug that caused DDC communication to fail when the
source was using clock stretching.
v1.2.1b4
Release date: 2017-12-18
New feature:
▪ New factory EDIDs have been added. F146 is an HDR EDID, F147
and F148 are 4k60 VESA-CVT RB EDIDs.
Bugfix:
▪ Fixed a bug that caused the matrix to be stuck in a reboot cycle
when the internal database was corrupted by restoring the
factory default settings.
MX2-HDMI20 series – User's Manual
v1.2.0b7
Release date: 2017-11-23
New feature:
▪ From this version on, the matrix supports CEC functionality.
▪ From this version on, the matrix will retry DDC communication
when it fails after connecting a device to the output port.
Bugfix:
▪ Fixed a bug that caused the resolution not to be calculated
properly for a 4:2:0 input video.
▪ Fixed a bug that caused the audio to be attenuated instead of
being muted.
v1.1.6b3
Release date: 2017-09-04
New feature:
▪ Added the LW2 recall preset command (in the form of {%<preset>})
to the LW2 command pool where <preset> is the name of the
preset to be recalled.
▪ Modified the input equalization settings to improve performance
when a device is connected to the matrix by a short HDMI cable.
Bugfix:
▪ Fixed a bug that caused the Advanced tab on the IO ports panel
not to be refreshed automatically upon parameter value changes.
v1.1.5b1
Release date: 2017-08-16
New feature:
▪ Added "High value mode" option to inputs. This mode prevents
HDCP1.x sinks from interacting with sources producing high
value HDCP 2.2 protected content.
▪ The 'Signal error rate' field of the Port property panel has been
moved to the 'Advanced' tab.
▪ We have added a new option (High Value mode) to the HDCP
enable field on the Port properties panel.
▪ We have added tooltip for the HDCP Enable field on the Port
properties panel.
▪ We have updated the HDCP capability field on Port properties
panel of output ports to display more detailed information.
▪ We have added a new 'Advanced' tab to the Port properties panel
with the following new fields: BCH ECC errors (input ports only),
Infoframes, Scrambling, Clock rate.
▪ Added HDCP "High Value mode" to LCD menu.
Bugfix:
▪ We have fixed a bug that prevented the pin of slider control
elements to be dragged by mouse.
▪ We have removed the Conversion mode field from the Port
properties panel of input ports as the device now allows
conversion on output ports only.
▪ We have fixed the bug that the EDID Creator failed to create
correct binary files during saving.
98