7. LW2 Programmers' Reference
7.3.9. Lock Specified Output
Description: Lock output <out>. Output's state cannot be changed
until unlocking.
Format
Command {#><out>}
Response (1LO<out²>)CrLf
Explanation: Output 5 is locked.
7.3.10. Unlock a Specified Output
Description: Unlock output <out>. The connection on output can be
changed.
Format
Command {+<<out>}
Response (0LO<out²>)CrLf
Explanation: Output 5 is unlocked.
INFO: The matrix issues the above response regardless of the
previous state of the output (either it was locked or unlocked).
7.4. Preset Handling
7.4.1. Load a Preset
Description: Recall a saved preset.
Format
Command {%<preset>}
Response (%<preset>)CrLf
Explanation: Preset called "Meeting_1" has been loaded and applied.
Example
→ {#>05}
← (1LO05)CrLf
Example
→ {+<05}
← (0LO05)CrLf
Example
→ {%Meeting_1}
← (%Meeting_1)CrLf
MX2-HDMI20 series – User's Manual
7.5. Commands - Quick Summary
Router Status Commands
Operation
View Product Type
View Serial Number
View the Installed Firmware
View CPU Firmware Compile Time
View Firmware of the Controller
View Installed Motherboard
View Crosspoint Size
View Router's Health
Query Control Protocol (RS-232)
Crosspoint Operations
Operation
Switch an Input to an Output
Switch an Input to All Outputs
Batch Switch Outputs
View the Connection of an Output Port
View Connections of all Outputs
View Mutes on all Outputs
Mute Specified Output
Unmute Specified Output
Lock Specified Output
Unlock a Specified Output
Preset Handling
Operation
Load a Preset
See in
Command
section
7.2.1
{i}
7.2.2
{S}
7.2.3
{F}
7.2.4
{CT}
7.2.5
{FC}
7.2.6
{IS}
7.2.7
{GETSIZE}
7.2.8
{ST}
7.2.9
{P_?}
See in
Command
section
7.3.1
{<in>@<out>}
7.3.2
{<in>@O}
7.3.3
{<in>@<out>}{<in>@<out>}
7.3.4
{?<out>}
7.3.5
{VC}
7.3.6
{VM}
7.3.7
{#<out>}
7.3.8
{+<out>}
7.3.9
{#><out>}
7.3.10
{+<<out>}
See in
Command
section
7.4.1
{%<preset_name>}
51