Front Panel Tab; System Tab - Lightware MX2-8x8-HDMI20-L User Manual


  
6. Software Control – Lightware Device Controller
6.9.4. Front Panel Tab
Certain settings in connection with the front panel LCD are available in the LDC as well.
LCD brightness: the slider can be set to 0 contrary to the front panel menu. When the value is 0, the LCD
▪
is totally dark.
▪ Lock front panel: the same as the Control lock button on the front panel.
Enable buzzer: enable/disable the built-in beeper.
▪
▪ Find my device: the matrix buzzer beeps shortly three times.
Front Panel Tab in the Settings Menu
MX2-HDMI20 series – User's Manual
6.9.5. System Tab
The following settings are available on this tab:
▪ Load factory default settings,
▪
Reboot the device,
▪ Sett the time (internal clock) of the matrix which is used for logging events.
ATTENTION! The internal clock is supplied by a button cell when the device is switched off. If the set time
is changed unintentionally or you met any weird behavior in connection with the internal clock, please
contact support@lightware.com.
System Tab in the Settings Menu
45