Lightware MX2-8x8-HDMI20-L User Manual page 99


  
12. Appendix
v1.1.4b6
Release date: 2017-07-31
New feature:
▪ We are introducing a subpage at http://<matrix_ip_address>/log
that allows to retrieve log files from the matrix.
Bugfix:
▪ Fixed a bug that prevented the LW2 switch command from being
executed.
▪ Improved IO port firmware update stability.
▪ Fixed a bug that caused no picture after an EDID switch on the
input.
▪ Fixed stability issues with HDCP 1.4 capable displays.
▪ Fixed a bug that prevented some sources from authenticating
via HDCP 1.4.
▪ Fixed a bug that caused v13 version of the input board to
malfunction during Hot Plug Detect.
v1.1.3b1
Release date: 2017-04-26
Bugfix:
▪ Fixed a bug that resulted in missing TMDS error rate indicators
for some ports.
▪ Improved crosspoint input equalization.
v1.1.2b4
Release date: 2017-03-17
Bugfix:
▪ Fixed a bug that resulted in the content of the front panel LCD
display to be mirrored.
▪ Fixed a bug that caused the TCP control connection to be closed
unexpectedly by the matrix. After the TCP connection was closed,
control could only be regained by power cycling the matrix.
MX2-HDMI20 series – User's Manual
v1.1.1b4
Release date: 2017-03-09
Bugfix:
▪ Fixed a bug that caused the error registers on the output not to
be cleared correctly resulting in false content in the logs.
▪ Fixed a bug that prevented the internal buzzer from being
disabled.
▪ Fixed a bug that caused the time and date not to be preserved
when the unit was power cycled.
▪ Fixed a bug that limited the number of retry attempts to three
when authentication of the attached display failed.
▪ Fixed a bug that caused some HDCP 1.4 repeaters (e.g. some AV
receivers) not to be authenticated properly.
▪ Fixed a bug that prevented the Lightware Protocol 2 switch
command from working.
▪ Fixed a bug that caused some displays not to authenticate
correctly when they were switched on after being connected to
the matrix.
▪ Fixed a bug where the input port mute caused permanent signal
loss on the input with HDCP2.2 contents.
▪ Fixed a bug resulting in the 4:4:4 to 4:2:0 conversion option to
remain active when the sampling pattern of the input signal was
4:2:0.
▪ Fixed a bug that caused the red picture on the display indicating
that it was not able to decrypt HDCP-encrypted content to flash
when HDCP 2.2 content encryption was used.
▪ Fixed a bug that caused compatibility issues with non-HDMI2.0
products resulting in inappropriate EDID reading.
v1.1.0b3
Release date: 2017-01-31
New feature:
▪ We are introducing automatic fan speed control. Now the fan
speed is set according to the system temperature.
▪ From this version on, HDCP 2.2 is supported by the matrix.
▪ We are introducing support for saving and loading presets.
Presets are used to store crosspoint settings and Mute state for
ports. Current lock state is reserved when loading a preset.
▪ We are introducing front panel USB support. The front panel
USB connector can now be used for connecting the matrix to a
controller computer running the Lightware Device Controller.
v1.0.1b1
Release date: 2016-12-02
Bugfix:
▪ Fixed a bug that caused the IPv6 address not to be displayed in
LDC for the first time.
v1.0.0b1
Release date: 2016-11-20
99