Installation; Mounting Options - Lightware MX2-8x8-HDMI20-L User Manual

Multimedia matrix switcher
Hide thumbs Also See for MX2-8x8-HDMI20-L:
Table of Contents

Advertisement

 

2. Installation

2
I nstallation
The chapter is about the installation of the device and connecting to other
appliances, presenting also the mounting options and further assembly steps.

Mounting Options

Ý
Connecting Steps
Ý
MX2-HDMI20 series – User's Manual
2.1. Mounting Options
The matrix can be mounted in several ways by the supplied two rack
ears. Allen head screws fix them to the housing:
WARNING! M4x8 size is the longest allowed screw for fixing the
ears to the housing. A longer screw may touch internal parts.
INFO: The method is the same when the matrix would be mounted
to a wall.
Standard Rack Installation (Default)
INFO: All models can be mount into the rack cabinet.
Two rack ears are supplied with the product, which are fixed on left
and right side as shown in the picture. The default position allows
mounting the device as a standard rack unit installation.
ATTENTION! Always use all the four screws for fixing the rack shelf
ears to the rack rail. Choose properly sized screws for mounting.
Keep minimum two thread left after the nut screw.
Mounting with Front and Rear Rack Ears
DIFFERENCE! Under-desk mounting is available for the 1U-high
models.
ATTENTION! Two rack ears are assembled on the matrix as default,
thus, you will need two more rack ears for this kind of installation,
which can be purchased separately.
The matrix can be easily mounted under the desk by rack ears. This
mounting option means the top of the matrix is parallel with the base
surface. Please do the following steps:
Step 1. Release and remove the fixing screws of the rack ears on the
matrix (both sides).
Step 2. Rotate the rack ears by 90° to the desired direction.
Step 3. Insert the screws into the holes and fix the front ears to the
matrix.
Step 4. Fix the two additional rear ears (not supplied with the product)
by the screws on both sides of the matrix.
Step 5. Fix the matrix through the holes of the rack ears to the desired
surface (screws are not supplied).
11

Advertisement

Table of Contents
loading

Table of Contents