Contrast Settings - 43 - Sony HDS-7100 User Manual

Obtaining a monochrome signal – F6 (MONO)
Applying a mask to the "sepia" function – F7 (MASK)
CONTRAST Settings – 43
Adjusting the contrast of the luminance signal
– F1 (CONTRST Y)
Press F6 (MONO), turning it on.
The color image changes to monochrome (black and white if no
"sepia" cast is applied).
Note
Turning the "sepia" function on, automatically turns off F1
(POSTER) and F3 (SOLAR) in the POSTER & NEGA menu.
To make the "sepia" function apply only inside or outside a mask
pattern, press F7 (MASK), turning it on.
This applies a mask, according to the settings in the MASK menu
( s e e p a g e 5 - 4 6 ) .
This function adjusts the contrast of the image.
In the VIDEO MODIFY menu, press F3 (CONTRAST) to display
the CONTRAST menu.
CONTRST CONTRST
Y C
CONTRAST menu soft key indications
The following are some of the operations carried out in this menu.
Use the following procedure.
1
Press F1 (CONTRST Y), turning it on.
MASK
) e d n u t i o n ( C
Chapter 5 Special Effects Operations
5-43