Sony HDS-7100 User Manual page 268

Global Channel Settings – 701
The channel assignments on the internal DME are fixed as
follows:
Logical Channel 1
Physical Channel 1
You can select whether channel 1 is included in the global channel
or not.
With the first set of soft key indications shown in the SETUP &
DIAG menu, press F1 (CH ASSIGN) to display the CHANNEL
ASSIGN menu.
An asterisk in boxes in the menu to the right of the legend "Comm.
Status" show the existence of a processor connected to the control
panel.
701 CHANNEL ASSIGN
Logical CH 1 2
1 2
Physical CH
Global Enable
CHANNEL ASSIGN menu
The following are some of the operations carried out in this menu.
2
2
Physical CH 1 2
Comm. Status
PHYSICAL GLOBAL
CH ENABLE
Chapter 10 Setup Operations
E
G 1 2 R
10-5