Changing The Skew, Aspect Ratio Or Perspective Of The Image; Changing The Skew Or Aspect Ratio Of The Image - Sony HDS-7100 User Manual

Changing the Skew, Aspect Ratio or
Perspective of the Image

Changing the Skew or Aspect Ratio of the Image

Procedure
This section describes how to change the skew, aspect ratio or
perspective of the image.
To change the skew or aspect ratio of the image, use the following
procedure in the transformation operation section.
1
In the function allocation section, press the SRCE button,
turning it on.
2
In the transformation mode selection section, press the ASP/
SKEW/PERS button, turning it on.
3
Move the trackball in the x- and y-directions to change the
skew of the image.
Turn the Z-ring to change the aspect ratio.
Note
It is also possible to set up the trackball so that when the ASP/
SKEW/PERS button is lit, movement in the x- or y-direction only
changes the aspect ratio. If, with this setting made, you wish to
change the skew using the trackball, press the ASP/SKEW/PERS
button turning it on while holding down the SHIFT button in the
keyframe operation section in step 2 of the above procedure.
For details see the TRACK BALL menu on page 10-10.
Chapter 3 Three-Dimensional Transformations
3-23