Sony HDS-7100 User Manual page 213

Effect Run Mode Settings – 71
Operation in the EFFECT RUN MODE menu
7-30
Chapter 7 Keyframe Effects
Making an effect loop – F1 (LOOP)
Press F1 (LOOP), turning it on.
Setting the loop mode – F2 (LOOP END TIME)
When looping effects in more than one channel, press F2 (LOOP
END TIME) to select the mode for timing between channels.
Same End: All channels loop in time with the longest effect.
Independent: The channels loop independently.
Ignoring the current delegation and running the effect
on all channels simultaneously – F3 (RUN TOGETHER)
To run the effects in currently unselected channels also together,
press F3 (RUN TOGETHER), turning it on.
Holding cross-point selections from before the effect
execution – F6 (XPOINT HOLD)
Press F6 (XPOINT HOLD), turning the "Xpoint Hold" setting to
"On".
Setting the default keyframe duration – F7 (DEFAULT KF
DUR)
This setting determines the keyframe duration given to all newly-
inserted keyframes when the CNST DUR button is off.
Use the following procedure.
1
Press F7 (DEFAULT KF DUR).
2
Enter the number of frames in the range 1 to 255 using the
numeric keypad, and press the ENTER button.
Preventing the cross-point button assignments from
changing when a snapshot is recalled – F8 (SNAPSHOT
XPOINT HOLD)
Press F8 (SNAPSHOT XPOINT HOLD), turning it on.