Freeze and Afterimage Effects
Applying modulation to "WIND" – F4 (MODULATION)
Applying a different color to the trail – F8 (TRAIL SOURCE)
5-30
Chapter 5 Special Effects Operations
Use the following procedure.
1
Press F4 (MODULATION), turning it on.
2
Adjust the modulation parameters.
Item
Setting
"Modulation H"
Apply horizontal
modulation
"Modulation V"
Apply vertical
modulation
Press F8(TRAIL SOURCE), and then operate in the same way as
for a trail.
For details of the operations, see the section "TRAIL Settings"
(page 5-27).
Knob adjustments of parameters
Left ("Amp"): amplitude (0 to 100%)
Center ("Freq"): frequency (0 to
100%)