Sony HDS-7100 User Manual page 177

Lighting
Setting the lighting colors – Light Color/Shade Color
5-96
Chapter 5 Special Effects Operations
The relationship between the pattern selection and the different
intensity regions for which you can actually make a setting is as
shown in the following table.
Pattern selection
"PLANE"
"PRESET" for page turn, roll,
cylinder and sphere effects
Others
To adjust the intensities for these different regions, align the line
cursor with "Intensity", and adjust the following parameters (some
of which may not appear, depending on the pattern selection).
• Left knob ("Lght"): "Light" region (0 to 100%)
• Center knob ("Ambt"): "Ambient" region (0 to 100%)
• Right knob ("Shad"): "Shade" region (0 to 100%)
It is possible to select independently the lighting colors for
highlights ("Light Color") or shade ("Shade Color").
Align the line cursor with "Light Color" or "Shade Color" (this
latter appears only for page turn, roll, cylinder and sphere effects),
then adjust the following parameters.
• Left knob ("Lum"): luminance (0 to 100%)
• Center knob ("Sat"): saturation (0 to 100%)
• Right knob ("Hue"): hue (0 to 359.99°)
Intensity regions for which
setting possible
"Light"
"Light", "Ambient" and "Shade"
"Light" and "Ambient"