Table of Contents
Advertisement
Register Utilities
Copying the contents of specified registers – F2 (COPY)
8-6
Chapter 8 Effect Utilities
Use the following procedure.
1
Press F2 (COPY).
The legend "COPY" appears in the numeric keypad area.
2
Enter the number of the first source register whose contents
are to be copied using the numeric keypad, and press the
ENTER button. Alternatively, click on the register number
displayed on the screen, using the mouse.
The entered register number appears in the numeric keypad
area followed by a dash. (e.g. "COPY 12 –")
3
Enter the number of the last source register whose contents are
to be copied using the numeric keypad, and press the ENTER
button. Alternatively, click on the register number displayed
on the screen, using the mouse.
The entered register is appended to the message in the numeric
keypad area, and then further "to" is appended (e.g. "COPY
12 – 24 to").
To copy only the register whose number was entered in
step 2
In step 3, without entering a register number, simply press the
ENTER button.
The legend "to" is appended in the numeric keypad area.
Advertisement
Chapters
Table of Contents
