Sony HDS-7100 User Manual page 221

Register Utilities
Swapping the contents of two registers – F4 (SWAP)
Write-protecting the contents of specified registers
– F5 (LOCK)
8-8
Chapter 8 Effect Utilities
Use the following procedure.
1
Press F4 (SWAP).
The legend "SWAP" appears in the numeric keypad area.
2
Enter the number of one of the registers whose contents are to
be swapped using the numeric keypad, and press the ENTER
button. Alternatively, click on the register number displayed
on the screen, using the mouse.
The entered register number appears in the numeric keypad
area followed by "and". (e.g. "SWAP 12 and")
Note
A swap operation is not possible if either of the registers is
write-protected.
3
Enter the number of the other register whose contents are to be
swapped using the numeric keypad, and press the ENTER
button. Alternatively, click on the register number displayed
on the screen, using the mouse.
The contents of the two registers are swapped.
Use the following procedure.
1
Press F5 (LOCK).
The legend "LOCK" appears in the numeric keypad area.
2
Enter the number of the first register whose contents are to be
write-protected using the numeric keypad, and press the
ENTER button. Alternatively, click on the register number
displayed on the screen, using the mouse.
The entered register number appears in the numeric keypad
area followed by a dash. (e.g. "LOCK 12 –")