Sony HDS-7100 User Manual page 162

Selecting the mask pattern – F2 (MASK PATTERN)
Breaking the image into pixels – F5 (PIXEL)
2
Set the "Transition" parameters.
• Left knob ("Trns"): amount of pixel movement (0 to 100%)
• Center knob ("Curv"): amount of pixel movement at the
periphery of the image (0 to 100%)
When pattern is "CIRCLE":
• Right knob ("Sprl"): degree of curvature of path of transition
(–100 to +100%)
When pattern is other than "CIRCLE":
• Right knob ("Asp"): aspect ratio of mask pattern (–100 to
+100%)
Use the following procedure.
1
Press F2 (MASK PATTERN), to select the mask pattern.
2
Adjust the position parameters.
• Left knob ("X"): x-coordinate of center of pattern (–5 to +5)
• Center knob ("Y"): y-coordinate of center of pattern (–4 to
+4)
Use the following procedure.
1
Press F5 (PIXEL), turning it on.
2
Adjust the "PIXEL" parameters.
• Left knob ("Dens"): degree to which portion of image to
which effect is applied disappears (0 to 100%)
• Center knob ("Rndm"): degree to which pixel position
becomes more randomized further from the center (0 to
100%)
Explosion PIXEL: OFF Explosion PIXEL: ON
Chapter 5 Special Effects Operations
5-81