Sony HDS-7100 User Manual page 152

Selecting the front or back of the turning page – F2 (MODE)
Selecting the color of the back of the page – F3 (BACK COLOR),
F5 (FLAT COLOR) and F6 (HUE ROT)
Press F2 (MODE), to select one of the following.
FRONT & BACK:
page.
FRONT: Output the front of the page only.
BACK: Output the back of the page only.
When the "MODE" item is set to "FRONT & BACK" or
"BACK", it is possible to apply a color to the back of the page (see
figure above).
Use the following procedure.
1
Press F3 (BACK COLOR), turning it on.
2
Use F5 (FLAT COLOR) or F6 (HUE ROT), to select the
color or signal used for the back of the page.
• F5 (FLAT COLOR): any single color (see page 5-11).
• F6 (HUE ROT): a background with a changing color (see
page 5-11).
3
Adjust the settings with the control knobs, as required.
For details of the settings, see the pages in parenthesis above.
Output both the front and the back of the
Back Front
Chapter 5 Special Effects Operations
5-71