Table of Contents
Advertisement
Tool bar operations
Operations in the TIMELINE menu
Clicking on a button in the tool bar executes the corresponding
operation as follows.
INS: Insert a keyframe. If the edit point is on a keyframe, insert
after that keyframe. (Same as the BEFR/INSRT button)
APEND: Insert a keyframe. If the edit point is on a keyframe,
insert before that keyframe. (Same as SHIFT + BEFR/
INSRT)
DEL: Delete a keyframe. (Same as the DEL button)
MOD: Modify a keyframe. (Same as the MOD button)
MOD ALL: Modify multiple keyframes. (Same as the MOD
ALL button)
CLR WORK: Clear the working keyframe buffer. (Same as the
CLR WORK BUFF button)
REV: Reverse the direction of the effect. (Same as the REVS
button)
STOP NEXT KF: Run the effect up to the next keyframe.
m : Rewind. (Same as the REW button)
: Move back one keyframe. (Same as the PREV KF button)
: Move back one frame.
x
: Stop the effect.
N : Run the effect. (Same as the RUN button)
: Move forward one frame.
: Move forward one keyframe. (Same as the NEXT KF
button)
M : Move to the last keyframe.
Changing the section of the timeline displayed – F1
(EXPAND)
Use the following procedure to change the start point of the section
of the timeline displayed or the scale.
1
Press F1 (EXPAND), turning it on.
2
To change the start point, adjust the left knob ("Start").
3
To change the length of the section displayed (i.e. the scale),
adjust the right knob ("Width").
Chapter 9 Status Displays
9-9
Advertisement
Chapters
Table of Contents
