Sony HDS-7100 User Manual page 78

Parameter Setting Screens
4-14
Chapter 4 Menu Operations
Using a cursor click and the numeric keypad
Use the following procedure.
1
Click on the "Lum" item.
2
Enter the value for the luminance using the numeric keypad.
You can alternatively enter a trim value, that is, the difference
from the current value.
Using the Z-ring
Use the following procedure.
1
Align the cursor on the "Lum" item. (A click is not
necessary.)
2
Turn the Z-ring to adjust the luminance value.
Using the mouse
Use the following procedure.
1
Move the mouse to place the cursor on the "Lum" item.
2
Hold down the left mouse button, and drag the mouse down.
The cursor is replaced by a bar gauge for the "Lum" value.
3
Drag the mouse to the right or left to increase or decrease the
setting respectively.
Lum 12.34
Bar gauge indicating the "Lum" value