Nonlinear Effects
Adjusting the split slide parameters
5-64
Chapter 5 Special Effects Operations
Adjust the parameters for the following items.
When F2 (MODE) is set to "SLANT" then only the "Transition
H", "Partition H" and "Slant Angle" items are enabled.
Item
Setting
"Transition
Nature of
H"
transition and
execution
"Partition
Way in which the
H"
pieces break up
"Transition
Nature of
V"
transition and
execution
"Partition
Way in which the
V"
pieces break up
"Slant
Angle of the split
Angle"
Knob adjustments of parameters
Left ("Trns"): degree of progress of
transition (0 to 100%)
Center ("Rndm"): degree to which
distances moved by different pieces of
image are randomized (0 to 100%)
Right ("Skew"): degree to which slide is
skewed (0 to 100%)
Left ("Wdth"): width of partition (0 to
100%)
Center ("Pos"): position of partition (–5 to
+5)
Left ("Trns"): degree of progress of
transition (0 to 100%)
Center ("Rndm"): degree to which
distances moved by different pieces of
image are randomized (0 to 100%)
Right ("Skew"): degree to which slide is
skewed (0 to 100%)
Left ("Wdth"): width of partition (0 to
100%)
Center ("Pos"): position of partition (–5 to
+5)
Right ("Angl"): angle of progress of the
split (–8 to +8)