Sony HDS-7100 User Manual page 290

Setting the time – F2 (TIME)
Selecting the frequency mode – F3 (FREQ)
Selecting 1035 lines or 1080 lines – F4 (ACTIVE LINE)
Selecting the screen aspect ratio – F5 (SCREEN)
To set the time, use the following procedure.
1
Press F2 (TIME).
The current time setting appears in the numeric keypad area.
2
Using the numeric keypad, enter the time in the format
hh.mm.ss, using the 24-hour clock.
For example, to set the time to 13:15 and 20 seconds, enter
13.15.20.
3
Press the ENTER button in the numeric keypad section.
This confirms the time setting on the menu screen.
Press F3 (FREQ) to select any of the 23.98Hz, 24.00Hz, 25.00Hz,
30.00Hz, 50.00Hz, 59.94 Hz, or 60.00 Hz mode.
Press F5 (ACTIVE LINE) to select 1035 or 1080 active scan lines.
Press F4 (SCREEN) to select a 16:9 or 4:3 screen aspect ratio.
Chapter 10 Setup Operations
10-27