Electrical; Battery Inspection - Yamaha TW200 Service Manual

I
IANOSJP
I
~
I
BATTERY INSPECTION
1rZ'".
----------------------------
ELECTRICAL
BATTERY INSPECTION
1. Remove:
-Seat
-Band
CD
-Battery
@
NOTE: _
Disconnect the negative lead first, and then dis-
connect the positive lead.
2. Check:
- Fluid level
Incorrect~
Refill.
Fluid level should be between upper
CD
and
lower
@
level marks.
1~'III1IIIII~J
_
Refill with distilled water only; tap water
contains minerals harmful to a battery.
3. Inspect:
- Battery terminal
Dirty terminal--+Clean with wire brush.
Poor connection --+ Correct.
NOTE: _
After cleaning the terminals, apply grease lightly
to the terminals.
4. Connect:
-Breather pipe
@
Be sure the hose is properly attached and
routed.
CD
Battery
5. Inspect:
- Breather pipe
Obstruction--+ Remove.
Damage--+ Replace.
When inspecting the battery, be sure the
breather pipe is routed correctly. If the
breather pipe touches the frame or exits in
such a way as to cause battery electrolyte
or gas to exit onto the frame, structural and
cosmetic damage to the machine can occur.
3-29