Yamaha TW200 Service Manual page 137

4-57
Universal Clutch Holder:
PIN YM-91042
Nut (Clutch Boss):
50 Nm (5.0 m-kg, 36 ft-Ib)
7. Bend the lock washer tab
CD
along the nut
flats.
8. Lubricate:
-Engine oil
To the push rod
#
1 and #2
CD.
-Lithium soap base grease
To the O-ring
@
on the push rod
#
1.
9.
Install:
-Push rod #2
CD
-Ball
@
- Friction plates
@
-Clutch plates
@
- Pressure plate
@
NOTE: _
- Apply the transmission oil onto the friction plate
@.
-Install the clutch plates and friction plate alter-
nately on the clutch boss, starting with a fric-
tion plate and ending with a friction plate.