Yamaha TW200 Service Manual page 193

343-004
During reassembly, the master link clip must be
installed with the rounded end facing the direc-
tion of travel.
DRIVE CHAIN AND SPROCKETS
ICHASI
~ I
3. Install:
- Drive chain
-Joint (Drive chain-New)
-Clip (Drive chain)
NOTE: _
~ --~"
--
--- ---
/' "-
-----
/
"
/ '
--.:::::-
--
(
\
I \
1
,
,~
\ 0
\
/
/
/ '
WARNING:
Alway use a new Joint.
CD
Turning direction
4. Lubricate:
- Drive chain
Chain Lube:
Yamaha Chain Lube or
Equivalent
5. Install:
-Dowel pins
-Gasket (New)
- Crankcase cover (Left)
®
-Change pedal
CD
- Footrest (Left)
@
-Clamp
@
Screws (Crankcase Cover):
7 Nm (0.7 m.kg, 5.1 ft·lb)
Bolt (Change Pedal):
10 Nm (1.0 m.kg, 7.2 ft.lb)
Bolt (Footrest):
60 Nm (6.0 m.kg, 43 ft.lb)
NOTE: _
Install the change pedal so that its top height
®
r;J
is same as footrest.
a.!J
6-35