Removal; Inspection - Yamaha TW200 Service Manual

____________ R_~_R_W_H_EE_L_lcHA~~1
REMOVAL
WARNING:
Support the motorcycle securely so there is
no danger of it falling over.
1. Remove:
-Cotter pin
CD
2. Loosen:
-Nut (Rear wheel axle)
@
3. Elevate the rear wheel by placing a suitable
stand under the engine.
4. Push the wheel forward and remove the drive
chain.
5. Remove:
-Nut (Rear wheel axle)
- Rear wheel axle
-Adjusters
- Rear wheel assembly
- Brake shoe plate
INSPECTION
1. Inspect:
-Axle shaft
Refer to "FRONT WHEEL-INSPECTION"
section.
2. Inspect:
-Wheel
Refer to "FRONT WHEEL-INSPECTION"
section.
3. Measure:
-Wheel runout
Refer to "FRONT WHEEL-INSPECTION"
section.
Rim Runout Limits:
Radial: 2.0 mm (0.08 in)
Lateral: 2.0 mm (0.08 in)
6-8