Chassis - Yamaha TW200 Service Manual

_ _ _ _ _ _ M_A_IN_T_E_N_A_NC_E_S_P_E_C_IF_IC_A_T_IO_N_S_I
SPEC
I
P
71
CHASSIS
Model TW200T/TC
Steering System:
Steering Bearing Type Ball bearing
No./Size of Steel Balls Upper 22 pes. 3/16 in
Lower 19 pes. 1/4 in
Front Suspension:
Front Fork Travel 160 mm (6.3 in)
Fork Spring Free Length Standard/Limit 312 mm (12.3 in)/ <307 mm (12.1 in)
>
Spring Rate/Stroke 5.0 N/mm (0.5 kg/mm, 28 Ib/in)/
0-165 mm (0-6.5 in)
Optional Spring
No.
Oil Capacity or Oil Level 238 cm
3
(8.38 Imp oz, 8.05 US oz)
135 mm (5.31 in)
(From top of inner tube fully compressed without
spring)
Oil Grade
Yamaha fork oil 10WT or Equivalent
Enclosed Air Pressure
o
kPa (0 kg/ cm
2
,
0 psi)
Collar Length 190 mm (7.48 in)
Rear Suspension:
Shock Absorber Travel 48 mm (1.9 in)
Spring Free Length 190 mm (7.5 in)
Spring Rate/Stroke
Kl
130 N/mm (13.0 kg/mm, 728Ib/in)/
0-32 mm (0-1.26 in)
K2
190 N/mm (19.0 kg/mm, 1,064 Ib/in)/
32-48 mm (1.26-1.89 in)
Optional Spring No.
Enclosed Gas Pressure 2,500 kPa (25 kg/cm
2
,
356 psi)
Swingarm:
Swingarm Free Play Limit (At Swingarm 1.0 mm (0.04 in)
End)
Swingarm Side Clearance (At Arm Pivot) 0.4-0.7 mm (0.016-0.028 in)
Wheel:
Front Wheel Type Spoke wheel
Rear Wheel Type
Spoke wheel
Front Rim Size/ Material
2.50 x 18/Aluminum
Rear Rim Size/Material MT4.50x 14/Steel
Rim Runout Limit- Vertical < 1.0 mm (0.04 in)
>
-Lateral
<
0.5 mm (0.02 in)
>
Drive Chain:
Typel Manufacturer 428DS/DAIDO
Number of Links
121 Links
+
Joint
Chain Free Play 30-40 mm (1.2-1.6 in)
2-11