IGNITION SYSTEM
I
ELEC
I
53
I
*
•
3. Ignition spark gap test (Without spark plug
and cap):
- Remove the spark plug and plug cap.
- Hold the spark plug lead 6 mm (0.24 in)
from the cylinder head.
- Repeat the aforementioned test.
-Check the ignition spark condition.
SPARK
Spark plug and/or plug cap is faulty.
Replace faulty part(s).
FAULTY
4.
"ENGINE STOP" and main switches con-
duct check:
a...
Check the "ENGINE STOP" and main • • • ~
".
switch for continuity. Refer to IISIGNAL
SYSTEM" section.
OK
7-8
IIENGINE STOP"
and/or
main
switches is faulty.
Replace faulty
part(s).