Yamaha TW200 Service Manual page 128

ENGINE ASSEMBLY AND ADJUSTMENT
I
ENG
1'.1
CAM CHAIN AND CAM CHAIN GUIDE
1. Install:
-Cam chain guides
CD
-Cam chain
~
Bolt (Cam Chain Guide):
8 Nm (0.8 m.kg, 5.8 ft·lb)
COl MAGNETO
1. Install:
-Pick up coil
CD
- Stator coil ~
Screw (Pick up Coil):
7 Nm (0.7 m.kg, 5.1 ft·lb)
Screw (Stator Coil):
4 Nm (0.4 m.kg, 2.9 ft·lb)
Use LOCTITE®.
2. Install:
- Plain washer
-Starter wheel gear
-Woodruff key
CD
-COl magneto
~
NOTE: _
- Clean the tapered portion of the crankshaft end
with a cloth.
-When installing the COl magneto, make-sure the
woodruff key is properly seated in the key way
of the crankshaft. Apply a light coating of lithi-
um soap base grease to the tapered portion of
the crankshaft end.
3. Tighten:
-Bolt (COl magneto)
CD
Use the Sheave Holder
~
to hold the COl
magneto.
Bolt (COl Magneto):
50 Nm (5.0 m.kg, 36 ft·lb)
~
__ S _h_ea_v_e_H_o_ld_e_r_: _
It:...J
PIN YS-01880
4-48