Disassembly; Inspection - Yamaha TW200 Service Manual

REAR SHOCK ABSORBER AND SWINGARM
ICHASI
~
I
DISASSEMBLY
1. Remove:
-Thrust covers
CD
-Shim
@
-Bush (Right)
®
-Bush (Left)
@
INSPECTION
1. Check:
-Swingarm (Vertical movement)
Move swingarm up and down.
Tightness/Binding/Rough sports--+-Inspect/
Grease the swingarm pivot.
2. Check:
-Swingarm (side play)
Over specified limit--+- Replace bush or adjust
side clearance.
Move swingarm from side to side.
Side Play (At End of Swingarm):
1.0 mm (0.04 in)
Side clearance adjustment steps:
- Remove the swingarm, thrust covers, shim(s)
and bushes. Refer to "REMOVAL" and "DIS-
ASSEMBLY" section.
-Wash them in a solvent.
-Measure the bush (Right) length
®
and bush
(Left) length
@.
- Measure the engine mounting boss width
@.
6-29