Table of Contents
Advertisement
A.4.2 Signal Connections for DN-8237-YB
Maintaining signal connections is one of the most important factors in ensuring that your
application system is sending and receiving data correctly.
Pin Assignment for CON1
The I/O connector on the DN-8237-YB is a 37-pin connector that enables you to connect to
the PISO-PS200 or I-8092F motion card. Fig. B4-2 shows the pin assignment for the 37-pin
I/O connector on the DN-8237-YB (or on the motion card), and refer to Table B4-2 for
description of each motion I/O signal.
Fig. B4-2 I/O connector pin assignment for the CON1
http:/www.icpdas.com
74
I8094Getting Started Manual for WinPAC Ver.1.1
Advertisement
Table of Contents
