Table of Contents
Advertisement
ECAT-2011H EtherCAT Slave I/O module
2.4 Wiring Connections
The factory default settings of ECAT-2011H/2012H is differentail input. You can refer to
Section
"AD Input Type Selection"
to change the input type. For more details regarding the voltage and
current wirings, refer to the table below.
NOTE: x = channel unmber
Voltage Input (Differential)
(Default Settings)
Voltage Input (Single-ended)
Currnet Input
ECAT-2016N is Strain Guage Input
Strain Guage Input
(Default Settings)
Copyright © 2019 ICP DAS CO., Ltd. All Rights Reserved.
- 12 -
Advertisement
Table of Contents
