2.2.2 Signal Connections for DN-8237-GB
Maintaining signal connections is one of the most important factors in ensuring that your
application system is sending and receiving data correctly.
Pin Assignment for CON1
The I/O connector on the DN-8237-GB is a 37-pin connector that enables you to connect to
the PISO-PS200(or I-8092F) motion card. Fig. 2-2 shows the pin assignment for the 37-pin
I/O connector on the DN-8237-GB (or on the motion card), and refer to Table 2-2 for
description of each motion I/O signal.
Fig. 2-2 I/O connector pin assignment for the CON1
http://www.icpdas.com
12
I8092F Getting Started ManualVer.2.3