Table of Contents
Advertisement
TB1
The connector TB1 is 7-pin connector that enables you to connect to the signals of your
motor drivers. Fig.B4-3 shows the pin assignment for the 7-pin connector on the
DN-8237-YB, and the Table B4-3 shows its I/O connector signal description.
TB2
The connector TB2 is 5-pin connector that enables you to connect to the signals of your
motor drivers. Fig.B4-4 shows the pin assignment for the 5-pin connector on the
DN-8237-YB, and the Table B4-4 shows its I/O connector signal description.
http:/www.icpdas.com
76
I8094Getting Started Manual for WinPAC Ver.1.1
Advertisement
Table of Contents
