ICP DAS USA I-8092F Getting Started Manual page 62

CN1 & CN2
The connectors CN1 and CN2 are 11-pin connectors that enable you to connect to the
signals of your motor drivers. Fig.B2-7 shows the pin assignment for the 20-pin connector
on the DN-8237-MB, and the Table B2-7 shows its I/O connector signal description.
Fig B2-7 Pin definition for CN1~ CN2
http:/www.icpdas.com
(The I/O signals of the X and Y AXIS )
Table B2-7 CN1~CN2
Name Number Description
ERC 12
EXT_PWR 11
EMG 10
LMT+ 9
LMT- 8
INPUT3 7
NRHOME 6
HOME 5
RESET 4
EXP+ 3
EXP- 2
EXT_GND 1
62 I8094Getting Started Manual for WinPAC Ver.1.1
Error Count Clear
EXT POWER 24V
Emergent Stop
Limit switch Input
Signal(+)
Limit switch Input
Signal(-)
Input Signal (IN3)
Near HOME Sensor Input
Signal
HOME Sensor Input
Signal
RESET Input Signal
EXT Positive Direction
Pulse(+)
EXT Positive Direction
Pulse(-)
EXT POWER Ground