2 HARDWARE INSTALLATION
2.1 Checking Package and Installation
2.1.1 Checking package
The i8092F are a 2-axis stepping/servo motor control module that can be
used on any of the ICPDAS WinPAC and XPAC_XPe/XPAC_CE series
controllers.
2.1.2 Installation
Prepare controller
1. Choose a PAC controller of ICPDAS (WinPAC or XPAC_XPe/XPAC_CE
series) and have empty slot.
2. Turn power off
Module Plug in controller and wiring
1. Plug in the i8092F into a empty slot of WinPAC/XPAC_XPE/XPAC_CE .
Connect the i8092F with DN-8237 by a CA-3710DM cable, as the below
2.
figure:
http://www.icpdas.com
Figure. i8092F with PAC controller
10
I8092F Getting Started ManualVer.2.3