Table of Contents
Advertisement
3.3 Motion Configuration Tool
The MotionCfg that is installed with i8092F now supports i-8094/F and i-8092F modules.
The MotionCfg utility helps to Add/Delete the system registries. By these settings,
WinPAC/ XPAC_CE/XPAC_XPe will activate the relative i-8094/F and i-8092F modules
while system booting up.
MotionCfg scans the available i-8094/F and i-8092F modules on backplane, checks the
relevant settings in system registries and the active motion-modules. Then MotionCfg
combines these information and display the status of i-8094/F and i-8092F modules,
including:
http:/www.icpdas.com
Active i-8092F.
None-Configure i-8094/F, indicates the configuration is
needed for the new modules.
Removed i-8094/F, means the configured modules had
been removed.
Failed i-8094/F, indicates some failure occurred while
starting driver.
Unsupported-Module or Empty-Slot.
32
I8094Getting Started Manual for WinPAC Ver.1.1
Advertisement
Table of Contents
