Table of Contents
Advertisement
2 HARDWARE INSTALLATION
2.1 Checking Package and Installation
2.1.1 Checking package
The i8092F are a 2-axis stepping/servo motor control module that can be
used on any of the ICPDAS I-8000, WinCon and WinPAC series controllers.
2.1.2 Installation
Prepare controller
1. Choose a PAC controller of ICPDAS (I-8000 or W-8000series) and have empty
slot.
2. Turn power off
Module Plug in controller and wiring
1. Plug in the i8092F into a empty slot of I-8000/W-8000.
Connect the i8092F with DN-8237 by a CA-3710DM cable, as the below figure:
2.
Figure. i8092F with PAC controller (WinCon-8000、LinCon-8000、I-8000)
http://www.icpdas.com
11
I8092F Getting Started ManualVer.2.3
Advertisement
Table of Contents
