Christie GS Series Service Manual page 59

3. Remove the 11 M3 screws with a Phillips #1 screwdriver securing the top shielding.
4. Unplug the fans 4 and 5 connector to the main board.
5. Loosen the four M3 screws with a Phillips #1 screwdriver securing the fans 4 and 5.
6. Separate the affected fan holder and fan.
7. Replace the affected fan.
8. To re-install the fan modules, follow these steps in reverse order.
GS Series 630-635 Service Manual
020-001224-02 Rev. 1 (08-2018)
Ventilation and cooling
59