Troubleshooting; Led Status Indicators; Light Led; Status Led - Christie GS Series Service Manual

Troubleshooting

Use this section for troubleshooting process.

LED status indicators

The LED indicators are located on the front and rear of the projector.
Light LED
Identify the laser diode state colors and meaning.
LED status
Red (flashing)
Orange (solid)
Green (solid)
Off

Status LED

Identify the LED state colors and meaning.
LED status
Off
Off, but keypad LED is on
Green (solid)
Green (flashing)
Orange (flashing)
Green (flashing) / Orange (solid)
Red (solid)
Red (flashing)
GS Series 630-635 Service Manual
020-001224-02 Rev. 1 (08-2018)
Projector state
Projector has lost over 60% initial luminance.
Laser diode time has expired.
Laser diode is on and operating correctly.
Laser diode is off.
Projector state
AC power is off (without AC plugged in).
AC has been applied, projector is in standby mode.
NOTE: Status LED cannot be flashing red, as this is reserved for an error
condition.
Status LED is off but keypad LED will indicate Standby Mode.
Projector is powered up and operating normally.
Projector communications.
Projector is in cool down mode or startup mode.
Projector is in flash update state.
Over-temperature.
Fan failure.
34