See
Removing the rear cover
4. Remove the left-side cover.
See
Removing the left-side cover
5. Remove the complete light engine.
See
Replacing the complete light engine
6. Remove the power supply.
See
Replacing the power supply
7. Remove the right-side cover.
See
Removing the right-side cover
8. To separate the AC inlet from the bottom shielding, remove the one M3 screw with a Phillips #1
screwdriver.
9. Remove the AC inlet from the bracket hole.
10. Replace the AC inlet.
11. To re-install, follow these steps in reverse order.
GS Series 630-635 Service Manual
020-001224-02 Rev. 1 (08-2018)
on page 52.
on page 53.
on page 66.
on page 61.
on page 54.
Electronics
64