Check Points Of Every 1 Year; Replacing Air Cleaner Element; Checking Dpf Differential Pressure Pipes And Hoses - Kubota D1803-CR-E4 Workshop Manual

Hide thumbs Also See for D1803-CR-E4:
Table of Contents

Advertisement

CHECK AND MAINTENANCE

10.Check points of every 1 year

7. Click the [Send Specified Active Test Value]
button (9).
NOTE
• If the actual position is traced target
position, the EGR valve is normal.
• If the actual position is not traced target
position, the EGR valve is abnormal so that
check it.
(9) Send Specified Active Test
Value button
8. Click the [Finish Active Test] button (10).
NOTE
• If it is determined that there is a failure,
check that the EGR valve gas passage and
coolant passage are not clogged.
• If it is determined that there is a failure,
clean any soot from the gas passage so that
it does not damage the EGR valve.
(10) Finish Active Test button
10. Check points of every 1 year

10.1 Replacing air cleaner element

1. Remove the dust cup (4).
D1803-CR-E4,D1803-CR-TE4,D1803-CR-TIE4,V2403-CR-E4,V2403-CR-TE4,V2403-CR-TE4BG,V2403-CR-TIE4
2. Remove used air cleaner primary element (3) and
secondary element (2).
(1) Air cleaner housing
(2) Secondary element
(3) Primary element
3. Replace new air cleaner primary element (3) and
secondary element (2).
NOTE
• The air cleaner uses a dry element.
Never apply oil to it.
• Do not operate the engine with filter element
removed.
4. Install the removed parts.
10.2 Checking DPF differential
pressure pipes and hoses
IMPORTANT
• Be sure to loosen the differential pressure pipe
tightening nut with crowfoot wrench to prevent
the damage of the sensor or pipe.
If it is still hard to loosen, apply the lubricant
spray to threaded portion and soak it with
lubricant.
• Tighten bolts and nuts to their specified torque.
Also tighten the differential pressure pipe
tightening nut to the specified torque with
crowfoot wrench.
Tools required
• Crowfoot wrench
1. Check the DPF differential pressure pipe (2), (3) for
crack, gas leakage and loose mounting nut.
NOTE
• If you find a crack, change the DPF
differential pressure pipe.
• If you find a gas leakage, remove the DPF
differential pressure pipe and wipe off the
anti-seize & lubricating compound.
3. MAINTENANCE
(4) Dust cup
(5) Evacuator valve
3-25
KiSC issued 12, 2018 A

Advertisement

Table of Contents
loading

Table of Contents