Kubota D1803-CR-E4 Workshop Manual page 258

4. ENGINE
1. Install the DPF bracket (1).
(1) DPF bracket
2. Install the muffler full assembly (2).
3. Loosely tighten the muffler full assembly mounting
screws (3).
(2) Muffler full assembly
4. Loosely tighten the muffler flange nut (4).
5. Tighten the muffler full assembly mounting screws
(3) and muffler flange nut (4) to the specified torque.
6. Clamp the cord of exhausts gas temperature sensor
with clamp (5).
7. Attach the exhaust
connector (6), (7), (8) to the bracket.
DPF bracket
mounting screw
Muffler full assem-
bly mounting
screw (M10) (3)
Tightening tor-
que
Muffler full assem-
bly mounting
screw (M8) (3)
Muffler flange nut
(4)
4-158
(3) Muffler full assembly mount-
ing screws
gas temperature sensor
60.8 to 70.8 N⋅m
6.20 to 7.21 kgf⋅m
44.9 to 52.2 lbf⋅ft
49.0 to 55.9 N⋅m
5.00 to 5.70 kgf⋅m
36.2 to 41.2 lbf⋅ft
23.5 to 27.5 N⋅m
2.40 to 2.80 kgf⋅m
17.4 to 20.2 lbf⋅ft
23.5 to 27.5 N⋅m
2.40 to 2.80 kgf⋅m
17.4 to 20.2 lbf⋅ft
D1803-CR-E4,D1803-CR-TE4,D1803-CR-TIE4,V2403-CR-E4,V2403-CR-TE4,V2403-CR-TE4BG,V2403-CR-TIE4
(4) Muffler flange nut
(5) Clamp
(6) Exhaust gas temperature
sensor connector (T )
2
(7) Exhaust gas temperature
sensor connector (T )
1
SERVICING
6. Assembling
(8) Exhaust gas temperature
sensor connector (T )
0
KiSC issued 12, 2018 A