Kubota D1803-CR-E4 Workshop Manual page 297

SERVICING
7. Servicing
(8) DPF Soot Load Reset item
3. Enter the "DPF/DOC part number and DPF/DOC
serial number" (10), then click the [OK] button (11).
(10) DPF/DOC part number and
DPF/DOC serial number
4. Follow the instructions according to steps of
"Notes" screen (12), then click the [Start] button
(13).
(12) Notes screen
5. Click the [OK] button to exit function.
D1803-CR-E4,D1803-CR-TE4,D1803-CR-TIE4,V2403-CR-E4,V2403-CR-TE4,V2403-CR-TE4BG,V2403-CR-TIE4
(9) Proceed button
(11) OK button
(13) Start button
(14) OK button
DPF manual regeneration
1. Start "Diagmaster", then click the [Utility] button
(15) from the project window.
(15) Utility button
2. Select the "DPF Manual Regeneration Request
Function" item (16).
3. Follow the instructions according to steps of
"Instruction" screen (17), then click the [proceed]
button (18).
(16) DPF Manual Regeneration
Request Function item
(17) Instruction screen
4. Select the "#DPF Manual Regeneration Request
Function" (19) from "Select Signal Group".
4. ENGINE
(18) Proceed button
4-197
KiSC issued 12, 2018 A