Removing Idle Gear; Removing Fuel Camshaft Assembly - Kubota D1803-CR-E4 Workshop Manual

SERVICING
5. Disassembling
2. Remove the O-ring (2).
3. Remove the crankshaft oil slinger (1).
(1) Crankshaft oil slinger
(2) O-ring

5.28 Removing idle gear

Tools required
• Gear puller
• Flywheel stopper
1. Mount a flywheel stopper (1) on the flywheel.
(1) Flywheel stopper
2. Loose the oil pump drive gear 1 mounting nut (5).
3. Remove the oil pump drive gear 2 (4) with gear
puller.
4. Remove the idle gear collar (2).
5. Remove the idle gear (3).
D1803-CR-E4,D1803-CR-TE4,D1803-CR-TIE4,V2403-CR-E4,V2403-CR-TE4,V2403-CR-TE4BG,V2403-CR-TIE4
(3) Crankshaft collar
(2) Idle gear collar
(3) Idle gear
(4) Oil pump drive gear 2
5.29 Removing fuel camshaft
assembly
1. Remove the fuel camshaft stopper (1).
2. Pull out the fuel camshaft assembly (2).
(1) Fuel camshaft stopper
4. ENGINE
(5) Oil pump drive gear 1
mounting nut
(2) Fuel camshaft assembly
4-127
KiSC issued 12, 2018 A