Check Points Of Every 2000 Hours; Check Points Of Every 1 Year - Kubota WG1605-G-E3 Workshop Manual

WG1605-G-E3,WG1605-L-E3,WG1605-GL-E3, WSM

[7] CHECK POINTS OF EVERY 2000 HOURS

[8] CHECK POINTS OF EVERY 1 YEAR

Replacing Spark Plug
1. Disconnect the ignition coil.
2. Remove the spark plug.
3. Replace the new spark plug.
4. Tighten the spark plug with a plug wrench.
IMPORTANT
(When reassembling)
• Put the ignition coil inside the spark plug terminal firmly.
• Make sure that the wiring and the ignition coil are correctly
connected.
• Fix the ignition coil by screw / nut.
Spark plug
Spark plug
Tightening torque
Ignition coil mounting screw
/ nut
(1) Spark Plug
Replacing Air Cleaner Element
1. Remove the dust cup from the air cleaner.
2. After cleaning the dust cup, remove the air cleaner element.
3. Replace the new air cleaner element.
(1) Air Cleaner Element
Replacing Gasoline Fuel Hose, Clamp Bands and Fuel Filter
1. Replace the fuel filter (1) with a new one.
2. Replace the hose (2) and clamp (3).
CAUTION
• In order to reduce the fuel pressure, do not remove the fuel
hose at least 3 minutes after stopping the engine.
• Remove the hose after covering the hose with a waste to
prevent scatter of fuel.
(1) Fuel Filter
(2) Fuel Hose
Cleaning Fuel Tank Inside (for Gasoline Fuel)
1. Following the unit / machine's operators manual, drain the
gasoline fuel in the fuel tank.
2. Clean the fuel tank inside.
G-17
GENERAL
NGK IFR6F8DN
24.5 to 29.4 N·m
2.50 to 2.99 kgf·m
18.1 to 21.6 lbf·ft
9.81 to 11.3 N·m
1.00 to 1.15 kgf·m
7.24 to 8.33 lbf·ft
9Y1210661GEG0046US0
9Y1210571GEG0040US0
(3) Clamp
9Y1210571GEG0012US0
9Y1210318GEG0037US0
KiSC issued 01, 2012 A