Removing Sensors - Kubota D1803-CR-E4 Workshop Manual

SERVICING
5. Disassembling
3. Remove the common rail (4).
IMPORTANT
• Store the common rail (4) so it does not get
any dust in it.
(3) Pressure limiter
(4) Common rail

5.12 Removing sensors

1. Remove the coolant temperature sensor (1).
(1) Coolant temperature sensor
2. Remove the camshaft position sensor mounting
screw (3).
3. Remove the camshaft position sensor (2).
D1803-CR-E4,D1803-CR-TE4,D1803-CR-TIE4,V2403-CR-E4,V2403-CR-TE4,V2403-CR-TE4BG,V2403-CR-TIE4
(5) Rail pressure sensor
(2) Camshaft position sensor
4. Remove the crankshaft position sensor mounting
screw (5).
5. Remove the crankshaft position sensor (4).
(4) Crankshaft position sensor
IMPORTANT
• If you drop the sensor, do not reuse it.
6. Remove the boost pressure sensor mounting screw
(7).
7. Remove the boost pressure sensor (6).
(6) Boost pressure sensor
4. ENGINE
(3) Camshaft position sensor
mounting screw
(5) Crankshaft position sensor
mounting screw
(7) Boost pressure sensor
mounting screw
4-121
KiSC issued 12, 2018 A