Removing Camshaft With Cam Gear; Removing Oil Pump; Removing Crank Gear - Kubota D1803-CR-E4 Workshop Manual

4. ENGINE
5.30 Removing camshaft with cam
gear
1. Remove the camshaft set screws and draw out the
camshaft (1) with cam gear (2).
(1) Camshaft

5.31 Removing oil pump

Tools required
• Gear puller
1. Remove the oil pump drive gear 1 mounting nut (1).
(1) Oil pump drive gear 1
mounting nut
2. Pull out the oil pump drive gear 1 (2) with a gear
puller (3).
4-128
(2) Cam gear
D1803-CR-E4,D1803-CR-TE4,D1803-CR-TIE4,V2403-CR-E4,V2403-CR-TE4,V2403-CR-TE4BG,V2403-CR-TIE4
(2) Oil pump drive gear 1
3. Remove the oil pump (4).
(4) Oil pump

5.32 Removing crank gear

Tools required
• Gear puller
1. Remove the crank gear (2) with a gear puller (1).
2. Remove the feather key.
3. Remove the idle gear shaft (3).
(1) Gear puller
(2) Crank gear
SERVICING
5. Disassembling
(3) Gear puller
(3) Idle gear shaft
KiSC issued 12, 2018 A